Dryer Booster Fan Kit w/ Current Sensor

Description

The DVK100B-C Dryer Booster Fan Kit includes a DVK100B fan and a current sensor. Dryer Booster Fans are designed to enhance the drying efficiency of residential, commercial and industrial clothes dryers. DVK Fans feature quiet and efficient backward curved impellers that are capable of overcoming long duct runs, and an in-line configuration that simplifies installation. Where possible, the DVK100B-C dryer booster fan kit with current sensor is the preferred method for activating a dryer booster fan. When a clothes dryer is operating and drawing at least one amp of current, the current sensor automatically activates the DVK100B dryer booster fan. The CS120AF current sensor has a preset actuation point (1.25 amp min) that enables automatic activation of the DVK fan when the clothes dryer is operating. When the drying cycle is complete, the current sensor causes the fan to shut off.

FEATURES & BENEFITS OF A DRYER EXHAUST FAN

• Boost dryer exhaust efficiency, reduce drying times, and deliver cost savings
• External rotor motor design for quiet and efficient operation
• Backward-curved centrifugal impeller to over come long duct runs
• In-line construction to reduce lint build-up
• Heavy gauge, drawn steel housing with baked epoxy finish
• High temperature construction: 60 C/140 F
• Thermal overload protection
• Automatic reset
• Five year warranty

Airflow Performance (cfm)

Visit CFM Select to utilize Continental Fan’s state-of-the-art fan selection and quotation platform.

Fan Dimensions

• Select the Charts / Diagrams tab below

Helpful Tips for a Dryer Booster Fan

Most residential dryers are designed to vent approximately 15 feet of duct. With the introduction of main floor and second story laundry rooms, duct runs have become complex, often exceeding dryer manufacturers’ recommendations. The results are longer drying times, greater wear and tear on the dryer and higher energy costs.

• DVK fans should be mounted at least fifteen linear feet from the clothes dryer.
• Each 90-degree elbow is equivalent to five linear feet of duct.
• DVK fans are designed to vent up to 100 feet of 4-inch rigid duct.
• Rigid duct is recommended to optimize fan performance.
• If using flex duct, it should be stretched as smooth as possible.
• For duct runs in unheated spaces, Continental Fan recommends insulated duct to reduce the effects of condensation.
• An LT100 lint trap may be installed between the dryer and the booster fan to reduce lint build-up and maintenance on the fan.
• Continental Fan does not recommend wiring a dryer booster fan directly into a clothes dryer.

Complete the job with our full line of fan accessories and controls.