TF Tranquil Bathroom Fans

Description

TF Tranquil Bathroom Fans are Energy Star qualified (models TF80 & TF110) and HVI certified. These traditional in-ceiling fans are engineered to provide superior ventilaition and efficient performance. The whisper-quiet operation of TF fans is under 1 sone. The built-in damper prevents a backdraft, keeping tempered air in a home when the fan is not operating. TF Tranquil fans are available in lighted and non-lighted versions, suitable for all interiors.

Features and Benefits of TF Tranquil Bathroom Fans

Superior ventilation and efficient performance
Whisper-quiet, under 1 sone
TF80 , TF110, & TF150 models
Lighted (TF80L & TF110L) models available
Clean, simple grille design
Galvanized steel housing
Easy installation
Double hanger mounting brackets adjust up to 24″ span
Built-in backdraft damper
Efficient AC motor
Single phase; 120V, 60 Hz operation
Automatic reset thermal overload protection
Available to fit duct sizes 4″ and 6″
TF80 is HVI certified and Energy Star qualified
TF110 is HVI certified and Energy Star qualified only for 6″ duct

MODEL	TF80	TF110	TF150
CFM @ 0.1" SP	80	110	150
CFM @ 0.25" SP	58	100
SONES	0.4	0.9	1.1
WATTS	25	33	43.2
POWER RATING (V/Hz)	120V / 60Hz	12V / 60 Hz	120V / 60 Hz
DUCT DIA. (In.)	4 & 6	4 & 6	6
GRILLE SIZE (In.)	13 x 14	13 x 14	13 x 14
HOUSING SIZE L x W x H (In.)	11.375 x 10.5 x 7.625	11.375 x 10.5 x 7.625	11.375 x 10.5 x 7.625
ENERGY STAR QUALIFIED	YES	YES, 6" duct only	NO

Visit CFM Select to utilize Continental Fan’s state-of-the-art fan selection and quotation platform.

Fan Dimensions & Performance Curves

Select the Charts / Diagrams tab below

How much airflow is required?

HVI recommends ventilation rates based on 8 air changes per hour. For most bathrooms this works out to 1 cfm per square foot of area, with a minimum of 50 cfm.

A bathroom less than 100 square feet:
- Calculate 1 cfm per square foot of floor area. A minimum of 50 cfm is the required ventilation rate.
A bathroom larger than 100 square feet:
- To calculate the proper ventilation rate, add the cfm requirement for each fixture; toilet 50 cfm,shower 50 cfm, bathtub 50 cfm, jetted tub 100 cfm. Note: For proper sizing,the static pressure (SP) needs to be calculated.

What is HVI?

HVI, also known as the Home Ventilating Institute, is an independent non-profit organization that certifies fan performance characteristics and provides HVAC guidelines for consumers. Learn more about HVI at HVI.org.